Product Center
Contact Us
Service Hotline
Tel:86-760-88414888
E-mail
sale@usa-grand.com
Add
NO. 136，Qiwan Roard North, East District, Zhongshan City, Guangdong
Microcomputer direct drive motor automatic induction pneumatic suction thread trimmer Baichuan brand (with PEGASUS overlock sewing machine)
An automatic sewing machine, controlled by a computer, is equipped with an automatic monitoring system, feeding system, and automatic starting, sewing according to a set trajectory, stopping needles, cutting threads, etc. It can automatically complete a certain sewing process.
Keywords: Sewing equipment
products model:
GMD1+GTC-8-P-PEGUSUS
Product Introduction
Product video：
The schematic diagram of component installation is as follows:
|
product name: |
Microcomputer direct drive motor automatic induction suction thread trimming device (direct drive motor + two or three pairs of radio-sensors + pneumatic thread cutter group + presser foot + air suction dust collection device, with PEGASUS overlock sewing machine series) |
| Product model: | GMD1-GTC-8-P-PEGASUS |
| Features: |
1.Using servo direct drive motor and control system, super power saving;
2. Electric eye sensor, which can automatically lift the presser foot to run and sew to achieve time-saving effect;
3. Electric eye sensor, which can set the number of stitches to control the automatic stop of sewing suction and thread trimming to save money;
4. Inductive induction, the number of stitches can be set to control the two sections of automatic suction before and after sewing to achieve air-saving effect;
5. Pneumatic thread cutter group is used. The angle of the fixed cutter can be adjusted to prolong the service life of the cutter body. The thread cutter can be used simultaneously without maintenance.
6. No need for skilled employees, let new and old employees stand on the same starting line.
7, save time, materials, labor, comprehensive production capacity increased by about 30%.
8. This product is suitable for heavy machine, Yamato, Pegasus, Yinjian and domestic overlock sewing machines.
9. If there are special circumstances, please contact the engineering department directly.
|
| GTC series thread cutting device | KS KH thread cutting device | |
| 1 | Push button manual thread trimming function, easy to use in special situations | No manual trimming function |
| 2 | Front stitch can be cut | Can't cut front suture |
| 3 | No need to stop cutting seams, can increase output by 30% | Must stop cutting suture |
| 4 | Back cut stitching length can be selected | Back cut stitching cannot be selected in length |
| 5 | The length of the suture is consistent after cutting to improve the quality of the product | Uneven stitch length after cutting |
| 6 | Can cut elastic bands, shoulder straps, etc. | Elastic bands, shoulder straps, etc. cannot be cut |
| 7 | Single process sewing can save up to 16CM line | Can't save line |
| 8 | Suction wind only at the moment of tangent to save energy and reduce noise | Always sucking air while sewing |
| 9 | even newbies can operate | Must be skilled |
Related products
图文详情
Online inquiry